Mgo Board Production Line , Dual Channel Roll Style System
Lightweight Wall Panel Machine
Fireproof Decoration Magnesium Oxide Board Production Line With
Larger Capacity
| Thermal Expansion Hot/Cold | 0, 01 mm/mC (from temp +20C to -20C) |
| Expansion in Water | less than < 0.02% from ambient to saturation |
| Freeze / Thaw - UNI EN 520 | 100 cycles without notable effects |
| Frost Resistance | no water drops form on surface |
| Combustibility / Fire Ratings | non-combustible / 12mm exceeds 1 hr fire rating |
| Dimensional tolerance | thick 0.2mm / width 2mm / length 3mm / Sq. 3mm |
| Toxicity Pollutants Heavy Metals - UNI EN 12457-2 | Below measurable levels of test instruments |
| Asbestos Analysis | Absent - not measurable |
| Formaldehyde Analysis | Absent - not measurable |
| Sound Attenuation (9mm) | tested design ASTM E90 = STC 48, 50, 55, & 60 |
| Color | Slate Grey and Chalk White |
| Surface texture | smooth one side; uniform machine textured back |
| Basic Compounds | (MgO)+(natural silicates)+(glass fibre)+(wood fibre) |
MGO Board/Magnesium Oxide Board/Fireproof Board for Interior and
exterior wall
>Magnesium oxide board also called MGO board and fireproof
board. It is manufactured by using special craft through totally
automatic product line. The features being green and 100% non
asbestos.
>Composition
The materials of magnesium fireproof board are Magnesia(MGO),
Magnesium Chlorid(Mgcl2)and Alkali glass fiber net.
>Main characteristic:
1. Fireproof-Grede A
2. Moisture resistant
3. Excellent impact resistant
4. Excellent sound insulation
5. 100% no asbestos
6. Light weight and easy to work
>Size:
*Thickness: 3mm-25mm
*Standard size: 1200*2400mm; 1220*2440mm
*The Max length is 3660mm and the max width is 1220mm
*other sizes can be cut as per requirements.
*Surface treatment: Slurry, Non-slurry and Laminated with HPL and
PVC
*Backside treatment: Texture and sanded
*Edge: Square/Tapered/Beveled/grooved
Application:
>Part ion wall indoor and outdoor
>Ceiling
>Acoustic perforated wall
>Core of fireproof door
Product Description
Wall panel production line:
Main System:
Molding machine/mixing system/grouting system/demould machine for
wall panel drawing out/turnover system
| Overall dimention of the moulding(mm) | 3030x2500x1200 |
| Total power | 23KW |
| Power of heating system(KW) | 20 |
| Power of hydraulic system(KW) | 3 |
| Hydraulic working pressure(Mpa) | 8 |
Maximum Hydraulic
working pressure(Mpa) | 16 |
| Capacity of hydraulic tank (L) | 70 |
| Wall panel size/Qty | 50mm | 10pieces |
| 100mm | 10pieces |
| 150mm | 7pieces |
1. Production line has good design, reasonable structure, stable
running and using dual-channel roll-style system. It is shaped in
one time and has stable thickness. Also it has higher yield. with a
vibration device, it eliminates the inside and outside bubbles. It
can produce 2-60mm thickness MOG board. And the widest is 1300mm,
for the length, there is no limits, and can adjust the thickness as
required.
2. The equipment can have many uses. It can produce the simulation
ash board, imitation red/white elm board, Oak panels, fireproof
relief door board, ceiling board and wall murals etc.
3. Simulation Ash board, it has high quality cooperation with wood
ash board appearance. Can do further work such as nail, sawing,
planning, and sticky. Size: 1200*2440*3mm (can adjust). Daily can
produce 200-1200 PCS according to different devices.
4. Fire Relief door board: Has ability of fire resistant, moisture
resistant, sound insulation and thermal insulation. Also can do
nail, sawing, plane, sticky work. The cost is half of wooden door
board. The imitation of Europe and classical three-dimensional
pattern is very elegant and antique.
5. Decorative Wall Murals: First get board from laminator machine,
veneer on above and then finish to produce landscapes, insects and
fish paintings. The biggest size is 1200*2500mm.
6. For MOG Board Production line, there are several departments:
Produce departments, finished products department and raw materials
department. Workers need: 3-6
7. Electricity: 1.1_10KW
8. Machines: High-speed mixer, 500type raw materials mixer,
pulverizer, mould receiving machine, raw materials lifter, forming
machine, foaming machine, oil-spreading machine, automatic cutter,
double location receiving board system, automatic board-unloading
unit, mould-cleaning machine, automatic four-edge cutting machine,
dust-collection system, operation platform, PLC self-controlling
system
9. There are many mould machines for customer to chose. Also can
buy single machine.
10. Buying the production line includes the technology transferring
costs.
11. Cultivate 2 technicians for customer side, and time is 7 days.
