Sandwich Wall Panel Fiber Cement Board Production Line , Mgo Board
Production Line
Multi-functional Board Production Line
It not only can produce Wall Panel, but also produce Single MgO
board.
1. Specification of Board:
Wall board:
Length: unlimited.
Width: 60cm ---- 120cm (Adjustable)
Thickness: 1cm----15cm (Adjustable)
Mgo Board
Length: unlimited.
Width: Maximum 1.3 m (Adjustable)
Thickness: 2mm-60mm (Adjustable)
Standard Specification of the board is 1.22mX2.44m
2. Machine Model:
According to different production capacity from 800 square meters
to 3000 square meters per eight hours wall board-making machine has
different models for large-scale, middle-scale and small-scale.
All machine can produce board with same best-quality and
specification board, only has different production capacity.
For whole production line, we have common one, semi-automatic one
and full-automatic one, you can choose any kind of production line
according to your own condition.
3. Application of Wall Board:
The wall board produced by our machine will replace solid brick as
indoor partition, wall of steel structure and frame structure as
well as wall of removable houses. Its products can be used for
outside wall heat-preserving in northeast area of China.
4. Board performance:
| 1 | Air-dry density | ≤ (Standard index)50kg/m2 | (Test Value) 30.0kg/ m2 |
| 2 | Drying shrinkage rate of the board | ≤0.08% | 0.015% |
| 3 | Anti-breaking load | ≥1400N | 5640N |
| 4 | Anti-impact | No breakage phenomenon such as cracking after three impacts | No breakage phenomenon such as cracking after three impacts |
| 5 | Thermal resistance of main section (T=90mm) | ≥1.35(m2.k)/w | ≥1.36(m2.k)/w |
| 6 | Thermal bridges area ratio | ≤8% | 2.22% |
| 7 | Sound reduction Index | | 36dB |
| 8 | Radioactivity | | None |
Technical index:
1. Oxygenic index%: 90
2. Level combustion: SO
3. Vertical combustion: SO
4. Water content rate: 10.9%
5. Capacity: 1.15g/cm3
6. Static bending intensity: 169.46Mpa
7. Density: T/ m3 1.13
8. Water resistance: Without chalking for 24 hours and there is no
change on surface
9. No “Three-wastes” (waste water, waste gas and waste residue), no
pollution and environmental protection
(I) Cost accounting
Raw material cost: 15 Yuan/ Piece; Wage: 0.5Yuan/ Piece;
Water-electricity fee: 0.2 Yuan/ Piece; Depreciation of the
workshop: 0.2Yuan/ Piece; Total: 15.90 Yuan/ Piece
(II) Profit analysis: production: (Take the middle-scale equipment
as example),400 pieces per day, at the common price of 40 Yuan/
Piece to sell, and then the profit per piece is that: 40 Yuan/
Piece-15.9 Yuan/ Piece=24.1 Yuan/ Piece, the profit per day is
that: 400 pieces×24.1 Yuan/ Piece=9640Yuan
